1-DIMENSIONS ..... 2-SUPPLIES ..... 3-BUILD

STEP 2: ROUND UP YOUR SUPPLIES

Here is a complete list of all the supplies you should need. You can go to the store and buy it all in one clean shot, but I recommend you read through all the instructions first so you know why you're buying everything.

1/2" thick plywood at least 4x4' (1)
8' long 2x4's (4)
4 1/2" long 3/8" diameter carriage bolts (4)
3/8" flat washers (4)
3/8" wing nuts (4)
2 1/2" wood screws (1 box)

Here's a list of all the tools I used as well. They're not all necessary but certainly the more power tools you can round up the easier it will all be.

circular saw, table saw, or hand saw (with mitre box)
mitre saw (optional)
measuring tape
clamps (optional)
drill and bits
sandpaper
hammer
compass (optional)
jigsaw

I made my set with a buddy of mine. You'll find that the dimensions for a Cornhole table conveniently coincide with the standard dimensions of lumber. We found it was most efficient to build two sets at once and you'll appreciate having some extra help. Just make sure you build the other guy's set first so you can learn from your mistakes before you make your own.

Take an extra 5 minutes to select some excellent lumber. Make sure your 2x4s aren't warped, split, or chewed up. Also, try to get a piece of plywood that has as few defects as possible. You're gonna want your platform surface to be as smooth as a baby's butt so save yourself the extra work of filling in gaps. We asked Home Depot to cut our plywood in half for easier transport home. If you do the same, make sure they know this is for a precision Cornhole set! Hover over their shoulder when they make that measurement because you don't want to be violating the American Cornhole Association established dimensions!

Prev Next